Shaver for Bonded Semi-Conductive Screen 244700
designed to remove the vulcanised semi conductive layer from cross wired polyethylene (XLPE) MV cables
- the tool has been designed for ease of use. To begin shaving just position the tool at the point where you want to start, adjust the depth of cut and then move the tool around the cable using the handle
- the stripping operation can be started from the cable end (approx. 25mm of screen will not be stripped) or from an intermediate point (approx. 4mm of screen will not be stripped)
- a small handle activates and de-activates the axial advancing
- a pin indicates the direction of advancement
- the tool guarantees a smooth finish without irregularities after shaving
- the tool can be used on cables from 10 to 52mm diameter
- the depth of cut is adjustable from 0 to 1.2mm in steps of 0.1 mm without the need of additional tools
- the minimum blade hardness is 55HRc
- the blade is easily replaced by using a 3mm Allen key
- operational down to -10°C
- very small rotation diameter (max 200mm)
- complies to EN 10020
Technical Data
| Part No | Description | Weight g |
| 244700 | Shaver for bonded semi-conductive screen (supplied in plastic case) | 1345 |
| 244701 | Replacement blade for 244700 | 5 |
| 244702 | 100g tube Silicone Paste for use with 244700 | 100 |
| 244703 | Replacement blade for 244700 (8°) | 20 |
| 244706 | Spares Kit for 244700 Cylinder/ Plates | 30 |
| 128930 | Replacement plastic case for 244700 | 100 |
| 244710 | Set consisting of : 244700 / 244702 / 128930 + Instructions | 1445 |
| 244100 | Preparation Kit for 11kV-XLPE Insulated Cable - in plastic case | 2510 |
